TP-Link AC750 Archer C20i V1 User Guide - Page 29
Archer C20i, 11bg mixed, 11bgn mixed, Channel Width, Channel, Wireless Network Name
View all TP-Link AC750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Archer C20i AC750 Wireless Dual Band Router Band - This field displayed the operating frequency being configured. Mode - This field determines the wireless mode which the router works on. 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. Channel Width - Select any channel width from the drop-down list. The default setting is "Auto", which can adjust the channel width for your clients automatically. Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. If you select "Auto", then the AP will select the best channel automatically. 7. Configure the basic parameters for 5GHz wireless network in the following screen as shown in Figure 3-14, and then click Next. Figure 3-14 Quick Setup - Wireless 5GHz Wireless Network Name - Also called the SSID (Service Set Identification). Enter a value of up to 32 characters. The same name must be assigned to all wireless devices - 18 -