TP-Link AC750 Archer C20i V1 User Guide - Page 37
Archer C20i, Username/Password, Secondary Connection, Disabled, Dynamic IP, Static IP, Always on,
View all TP-Link AC750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Archer C20i AC750 Wireless Dual Band Router Figure 4-5 WAN - PPPoE Username/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Secondary Connection - It's available only for PPPoE Connection. If your ISP provides an extra Connection type such as Dynamic/Static IP to connect to a local area network, then you can check the radio button of Dynamic/Static IP to activate this secondary connection. Disabled - The Secondary Connection is disabled by default, so there is PPPoE connection only. This is recommended. Dynamic IP - You can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP. Static IP - You can check this radio button to use Static IP as the secondary connection to connect to the local area network provided by ISP. Always on - In this mode, the Internet connection will be active all the time. Connect on Demand - In this mode, the Internet connection can be terminated automatically after a specified inactivity period (Max Idle Time) and be re-established when you attempt to access the Internet again. If you want your Internet connection keeps active all the time, please enter "0" in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet access disconnects. Connect Manually - You can click the Connect/Disconnect button to connect/disconnect immediately. This mode also supports the Max Idle Time function as Connect on Demand - 26 -