TP-Link AC750 Archer C20i V1 User Guide - Page 36
Archer C20i, IP Address, Subnet Mask, Gateway, DNS Server/Secondary DNS Server, MTU Bytes, Enable
View all TP-Link AC750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Archer C20i AC750 Wireless Dual Band Router Figure 4-4 WAN - Static IP IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0. Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation provided by your ISP. DNS Server/Secondary DNS Server- (Optional) Enter one or two DNS addresses in dotted-decimal notation provided by your ISP. MTU (Bytes)- The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU size unless required by your ISP. Enable Fullcone NAT - It is a type of NAT, if not enabled, the default NAT will act. Enable IGMP Proxy - IGMP (Internet Group Management Protocol) is used to manage multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration for client devices, such as the modem router. The default value is enabled, and if you are not sure, please contact your ISP or just leave it. Click the Save button to save your settings. 3. If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. And you should enter the following parameters (Figure 4-5): - 25 -