TP-Link AC750 Archer C20i V1 User Guide - Page 50
Use the Wi-Fi Protected Setup Button
View all TP-Link AC750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Archer C20i AC750 Wireless Dual Band Router Note: To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile. I. Use the Wi-Fi Protected Setup Button Use this method if your client device has a WPS button. Step 1: Press the WPS/Reset button on the side panel of the router, as shown in Figure 4-17. You can also keep the default WPS status as Enabled and click the Add device button in Figure 4-16. Then choose "Press the WPS button of the new device within the next two minutes" and click Connect, shown in Figure 4-18. Figure 4-17 Figure 4-18 Add A New Device Step 2: Press and hold the WPS button of the client device. Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process. Step 4: When the WPS LED is on, the client device has successfully connected to the router. - 39 -