TP-Link TD-W150KIT User Guide - Page 47
Routing
View all TP-Link TD-W150KIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-25 ¾ Firewall: Select this option can automatically detect and block Denial of Service (DoS) attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack. ¾ SPI: If you enable SPI, all traffics initiated from WAN would be blocked, including DMZ, Virtual Server, and ACL WAN side. 4.4.2 Routing Choose "Advanced Setup→Routing" menu, and you will see the routing information in the next screen (shown in Figure 4-26). Figure 4-26 Click ADD ROUTE button to add a new route in the next screen (shown in Figure 4-27). Figure 4-27 ¾ Destination IP Address: This parameter specifies the IP network address of the final destination. 41
TD-W8951ND
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-25
¾
Firewall:
Select this option can automatically detect and block Denial of Service (DoS)
attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack.
¾
SPI:
If you enable SPI, all traffics initiated from WAN would be blocked, including DMZ, Virtual
Server, and ACL WAN side.
4.4.2 Routing
Choose “
Advanced Setup
→
Routing
” menu, and you will see the routing information in the next
screen (shown in Figure 4-26).
Figure 4-26
Click
ADD ROUTE
button to add a new route in the next screen (shown in Figure 4-27).
Figure 4-27
¾
Destination IP Address:
This parameter specifies the IP network address of the final
destination.
41