TP-Link TL-WR1043ND User Guide - Page 12
The Rear Panel, TL-WR1043N/TL-WR1043ND, POWER, RESET, Factory Defaults, System Tools - usb
UPC - 845973051389
View all TP-Link TL-WR1043ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
TL-WR1043N/TL-WR1043ND Wireless N Gigabit Router ) Note: After a device is successfully added to the network by QSS function, the QSS LED will keep on for about 5 minutes and then turn off. 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). ¾ POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-WR1043N/TL-WR1043ND Wireless N Gigabit Router. ¾ RESET: There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the Router's Web-based Utility. 2) Use the Factory Default Reset button: Press the Reset button for five seconds and then wait for the Router to reboot. ¾ USB: Connect with USB Mass Storage Device. ¾ WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet ¾ 1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s) ¾ Wireless antenna: To receive and transmit the wireless data. -5-