Toshiba 30HF85 User Manual - Page 11

Important Safeguards Welcome to Toshiba Connecting your TV Connecting a DTV receiver / set-top box with ColorStream® (component video) and a VCR This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs. Your TV has ColorStream® (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism. From Antenna Stereo VCR IN from ANT OUT to TV CH 3 CH 4 TV IN OUT VIDEO L R AUDIO You will need: • three coaxial cables • two sets of standard A/V cables • one set of standard audio cables • one set of component video cables Note: You can connect the component video cables to either set of ColorStream jacks on the TV (HD-1 or HD-2.) For HDMI connection see page 14. The ColorStream HD-1 and HD-2 jacks and HDMI jacks can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance. If your DTV receiver does not have component video, use the S-video and standard audio connections instead. Do not connect both an S-video and a standard video cable to VIDEO1 (or VIDEO2) at the same time or the picture performance will be unacceptable. From DTV Antenna Y S-VIDEO COMPONENT VIDEO VIDEO OUT AUDIO OUT L R DTV Receiver with Component video The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Using the Remote Control Setting up your TV Using the TV's Features Appendix J3S40121B(E)_P07-15 11 11 24/02/2005, 6:06 PM