Toshiba 30HF85 User Manual - Page 22

Image tilt correction When you install or change the direction of the TV, the picture may become tilted (caused by the Earth's magnetism.) If this happens, use the image tilt correction feature to obtain the best possible picture. To adjust the image tilt: 1. Press MENU, then press or until the SETUP menu appears. 2. Press L or M to highlight IMAGE TILT. 3. Press or to adjust the picture tilt (from -10 to 10.) SETUP CLOSED CAPTION PICTURE SIZE PICTURE SCROLL CINEMA MODE ASPECT IMAGE TILT :SELECT OFF VIDEO ON 0 :ADJUST Adding channels to the TV's memory When you press CH 3 or 4, your TV will stop only on the channels you have stored in the TV's channel memory. Follow the steps below to program channels into the channel memory. Programming channels automatically Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase channels manually. To add channels automatically: 1. Press MENU, then press or to display the SETUP menu. 2. Press L or M until the TV/CABLE selection is highlighted. 3. Press or to highlight either TV or CABLE, depending on which you use. SETUP LANGUAGE CLOCK SET TV / CABLE CH PROGRAM ADD / ERASE ENGLISH 12:00AM TV / CABLE ADD If you use an antenna, choose TV. If you use cable, choose CABLE. :SELECT :ADJUST 4. Press M until the CH PROGRAM selection is highlighted. 5. Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message "PROGRAMMING NOW-PLEASE WAIT" appears. 6. When channel programming is complete, the message "COMPLETED" appears. 7. Press CH 3 or 4 to view the programmed channels. Adding and erasing channels manually After you have programmed the channels automatically, you can add or erase specific channels manually. To add or erase channels manually: 1. Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons. 2. Press MENU, then press or to display the SETUP menu. 3. Press L or M to highlight ADD/ SETUP LANGUAGE CLOCK SET TV / CABLE CH PROGRAM ADD / ERASE ENGLISH 12:00AM CABLE ADD / ERASE ERASE. 4. Press or to select ADD or :SELECT :ADJUST ERASE, whichever function you want to perform. 5. Repeat steps 1-4 for other channels you want to add or erase. Channel Numbers Channel 3 4 Menu Setting up your TV J3S40121B(E)_P16-23 22 22 24/02/2005, 6:06 PM