Toshiba 30HF85 User Manual - Page 36

Selecting the color temperature Change the picture quality by selecting from three preset color temperatures-cool, medium, and warm-as described in the following table: Mode COOL MEDIUM WARM Picture Quality Blueish Neutral Reddish To select the color temperature: 1. Press MENU, then press or to display the PICTURE menu. 2. Press L or M to highlight COLOR TEMPERATURE. PICTURE CableClear ONCOOL COLOR TEMPERATURE COOL COOL / MEDIUM / WARM DISPLAY FORMAT 1080i SVM HIGH RESET :SELECT :ADJUST 3. Press or to highlight the mode you prefer. 4. Press EXIT to return to normal viewing. Using the CableClear™ feature CableClear™ reduces visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a video cassette or disc damaged by repeated use. To turn on the CableClear™ feature: 1. Press MENU, then press or to display the PICTURE menu. 2. Press L or M to highlight CableClear. Menu Exit PICTURE CableClear COLOR TEMPERATURE DISPLAY FORMAT SVM RESET :SELECT ON/OFF COOL 1080i HIGH :ADJUST 3. Press or to select ON. To turn off the CableClear™ feature: Select OFF in step 3. Selecting the Scan Velocity Modulation (SVM) The SVM feature enhances picture contrast and sharpness. This feature has three modes: HIGH, LOW, and OFF. To select the SVM feature: 1. Press MENU, then press or to display the PICTURE menu. 2. Press L or M to highlight SVM. Note: SVM is not required when viewing some high-quality video material. If you are watching high-quality video material, you may want to set SVM to OFF. PICTURE CableClear COLOR T E M P E R AT U R E D I S P L AY F O R M AT SVM RESET :SELECT ON COOL 1080i HIGH HIGH / LOW / OFF :ADJUST 3. Press or to select the mode you prefer. To turn off the SVM: Select OFF in step 3. 36 Using the TV's Features J3S40121B(E)_P31-37 36 24/02/2005, 6:07 PM