Toshiba BDX3000 Owners Manual - Page 29
Display Setting
View all Toshiba BDX3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
FUNCTION SETUP Customizing the Function Settings BD-Live Internet Access: • Limit Access - Allows Internet access with valid "BDLive" network access approval. • Always Allow Access - Always allows BD-Live Internet access. • Prohibit Access - Never allows BD-Live Internet access. In order to set the player up for BD-Live Internet Access, perform the following steps: 1. In the main menu of Settings, press button, then use / to select BD-Live, then press OK. 2. Press / to select "BD-Live Internet Access", and then press OK. 3. Use / to select the desired setting, and then press OK to confirm. 4. Make sure that "Limit Access" or "Always Allow Access" is checked. 5. Once the USB device or SD card has been inserted, if there is not at least 100Mbyte of free space on the device, you should choose "Erase Blu-ray Storage" from the BD-Live setup menu. 6. Press to return to the main menu of Settings, then use / to highlight Network, and then press OK. (For details, please refer to "Network Connection Setting" on Page 36.) Notes: • Depending on your connection environment, it may take time to connect to the Internet or the Internet may not be connected. • When BD-Live function are used and the unit is connected to the Internet, you may be charged for this communication. • Do not remove the USB device or SD card when using the BD-Live function. BD-Live Storage: This option is used to tell the BD player whether or not to use an inserted SD card or USB device to store BD-Live content (movie trailers, additional scenes, etc.). In order to add BD-Live memory for BD-Live Internet Access, insert an USB device or SD card (1GB is recommended) into the USB slot or SD card slot on the player. Erase Blu-ray Storage: If you choose OK to erase Blu-ray storage, all bookmarks and BD-Live content saved in memory are deleted. Display Setting 1. In the main menu of Settings, press button to select Display, and then press OK to confirm. 2. Press / to select an option, and then press OK. 3. Use / to select the desired option, and then press OK to confirm your selection. 4. Press to go to the previous menu. Display HDMI Status HDMI Preferred Format Resolution TV Aspect Film Mode Deep Color Bluray 3D Mode Connected 1080p HDMI Auto 16:9 Pillarbox Off On Automatic HDMI Status: This option displays the HDMI status. If an HDMI TV is connected, Connected appears. If an HDMI TV is not connected, Disconnected appears. HDMI Preferred Format: This option shows the best HDMI format for the connected TV. Resolution: You can define the video output resolution in this option. In case that the menu of "Resolution" setting disappears, make composite video (yellow) connection to restore it, then select the resolution which is compatible with the connected TV. Notes: • Selecting a resolution the TV does not support could result in an unstable picture or loss of the picture. See the documentation that came with the TV to find the resolutions the TV supports. • Only the HDMI output on your player supports 1080p video output at any frame rate. If the TV is connected to the component output, the video output is limited to 1080i or lower. 29 Downloaded from www.Manualslib.com manuals search engine