Toshiba MD14H63 Owners Manual - Page 36

a disc (Continued) [] To pause playback (still mode) Press PAUSE during playback. [] To remove the disc Press OPEN/CLOSE. PAUSE To resume normal playback, press PLAY. OPENICLOSE (_) Remove the disc after the disc tray opens completely. PLAY CE) The sound is muted during still mode. [] To stop playback Press STOP. STOP (]E) ® Be sure to press OPEN/CLOSE to close the disc tray after you remove the disc. ® Notes: • If a non-compatible disc is loaded, "incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen according to the type of loaded disc. In this case, check your disc again [_ _. • Some discs may take a minute or so to start playback. • When you set a single-faced disc labe( downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit, "Reading" will appear on the display for a few minutes and then "incorrect Disc" will continue to be displayed. • Some discs may not work the resuming facility. • Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page @. • Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs. • Do not move the unit during playback. Doing so may damage the disc. • Use OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the unit to malfunction. • Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to malfunction. • In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press POWER on your remote control once the movie is completed. • There may be a slight delay between you pressing the button and the function activating. [] To obtain a higher quality picture Occasionally, some picture noise not usually visible on the TV screen during a normal broadcast may appear while playing a DVD video disc. It is because due to high resolution pictures on these discs which include a lot of information. The amount of noise depends on the disc you use with this unit. You should generally reduce the sharpness adjustment on your TV when viewing DVD video discs. [] About _v,b>q,L_ The C6_-DC_%L,__ icons on the heading bar show the playable discs for the function described under that heading. ___ :You can use this function with DVD video discs.