Toshiba SD-K770KU Owners Manual - Page 7

Connections

Get Toshiba SD-K770KU PDF manuals and user guides View all Toshiba SD-K770KU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

English Connecting to television IMPORTANT! - You only need to make one video connection from the following options, depending on the capabilities of your television. - Connect the DVD player directly to the television. Using Composite Video Jack(CVBS) Connections IMPORTANT! -The progressive scan video quality is only possible when using Y PB PR and a progressive scan TV is required. A Use the component video cables (red/blue/green) to connect the DVD player' s Y PB PR jacks to the corresponding Component video input jacks (or labeled as Y Pb Pr) on the TV (cable not supplied). B Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD player to the corresponding AUDIO IN jacks on the TV (cable not supplied). C Proceed to page 11 for detailed Progressive Scan set up. Using a RF modulator A Use the composite video cables (yellow) to connect the DVD player' s VIDEO(CVBS) jack to the video input jack(or the labled as A/V in,Video In or Composite) on the TV(cable supplied). To hear the sound of this DVD player through your TV, use the audio cables(white/red)to connect AUDIO OUT(L/R)jacks of the DVD player to corresponding AUDIO IN jacks on the TV(cable supplied). Using Component Video Jacks(Y PB PR) IMPORTANT! -If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need an RF modulator in order to view the DVD playback on the TV. A Use the composite video cable (yellow) to connect the DVD player' s CVBS jack to the video input jack on the RF modulator (cable supplied). To hear sound of this DVD player through your TV, use the audio cables(white/red) to connect AUDIO OUT (L/R) jacks of the DVD player to the corresponding AUDIO IN jacks on the RF modulator (cable supplied). B Use the RF coaxial cable (not supplied) to connect ANTENNA OUT or TO TV jack on the RF modulator to the ANTENNA IN jack on the television. C Connect the Antenna or Cable TV service signal to the ANTENNA IN or RF IN jack on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV.) Helpful hint: before making or changing any connections, make sure that all the devices are disconnected from the power outlet. 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
English
Connecting to television
I
MPORTANT!
– You only need to make one video connection
from the following options, depending on the
capabilities of your television.
– Connect the DVD player directly to the televi-
sion.
Using Composite Video Jack(CVBS)
A
Use the composite video cables (yellow) to connect
the DVD player
'
s VIDEO(CVBS) jack to the video
input jack(or the labled as A/V in,Video In or Com-
posite) on the TV(cable supplied).
To hear the sound of this DVD player through your
TV, use the audio cables(white/red)to connect AU
-
DIO OUT(L/R)jacks of the DVD player to correspond
-
ing AUDIO IN jacks on the TV(cable supplied).
Using Component Video Jacks(Y PB PR)
IMPORTANT!
-The progressive scan video quality is only pos-
sible when using Y P
B
P
R
and a progressive scan
TV
is required.
A
Use the component video cables (red/blue/green)
to
connect the DVD player
'
s Y P
B
P
R
jacks to the cor-
responding Component video input jacks (or labeled
as Y P
b
P
r
) on the TV (cable not supplied).
B
Use the audio cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to the correspond
-
ing AUDIO IN jacks on the TV (cable not supplied).
C
Proceed to page 11 for detailed Progressive Scan set
up.
Using a RF modulator
I
MPORTANT!
-If your TV only has a single Antenna In jack (or
labeled as 75 ohm or RF In), you will need an RF
modulator in order to view the DVD playback on
the TV.
A
Use the composite video cable (yellow) to connect
the DVD player
'
s CVBS jack to the video input jack
on the RF modulator (cable supplied).
To hear sound of this DVD player through your TV,
use the audio cables(white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to the correspond
-
ing AUDIO IN jacks on the RF modulator
(cable sup-
plied).
B
Use the RF coaxial cable (not supplied) to connect
ANTENNA OUT or TO TV jack on the RF modulator
to the ANTENNA IN jack on the television.
C
Connect the Antenna or Cable TV service signal to
the ANTENNA IN or RF IN jack on the RF modulator.
(It may have been connected to your TV previously.
Disconnect it from the TV.)
Connections
Helpful hint:
before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.