Toshiba SD-V290 Owners Manual - Page 12
Basic TV, RF coaxial connection, Audio/Video connection
View all Toshiba SD-V290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connections (Continued) Basic TV Connections z Make one of the following connections, depending on the capabilities of your existing equipment. RF coaxial connection Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R). Note If you use this connection, tune the TV to the DVD+VCR's RF output channel (CH 3 or 4). How to set the DVD+VCR's RF output channel 1. When the DVD+VCR is turned off, press and hold CHANNEL v or CHANNEL V on the front panel for about five seconds. It will turn itself on and "RF 03" or "RF 04" appears in the display window. 2. Press CHANNEL v or CHANNEL V on the front panel or CH/TRK (+/-) on the remote control to change the RF output channel (CH 03 or CH 04). 3. Turn off and on the DVD+VCR. 4. Press the TV CH to 3 or 4 depending on the RF output channel you had selected. Now you can watch the DVD+VCR playback on CH3 or CH4 of your TV. Audio/Video connection 1 Connect the DVD/VHS VIDEO OUT jack on the DVD+VCR to the video in jack on the TV using the video cable supplied (V). 2 Connect the Left and Right DVD/VHS AUDIO OUT jacks on the DVD+VCR to the audio left/right in jacks on the TV (A1) using the supplied audio cables. Note If you use this connection, set the TV's source selector to VIDEO. Rear of TV ANTENNA INPUT R Rear of DVD+VCR AUDIO INPUT VIDEO INPUT L R A1 V 1-14