Toshiba SDK990 Owner's Manual - English - Page 32

Function setup Customizing the Function Settings (continued) Setting details HD JPEG Mode 1) Press SETUP button. 2) Press / button to select Video. 3) Press button, then use the / button to select HD JPEG Mode. 4) Press ENTER button, then use the / button to select On or Off mode. 5) Press ENTER Aspect Ratio : 16 : 9 button. : Auto Fit 6) Press SETUP button to exit the menu. Video Out : HDMI HDMI Resolution On HD JPEG Mode Off JPEG Interval On: JPEG image is displayed in a suitable picture quality (480p, 720p, 1080i or 1080p). Off: The picture quality is fixed to 480p. Notes • If the Video Out is not set to "HDMI", you cannot select the "HD JPEG Mode". • All JPEG pictures will not be output through the VIDEO OUT jack and Component video (Y/PB/PR) jacks if the HD JPEG Mode is on and you may view pictures through HDMI jack. • For HDMI output, DISPLAY and ZOOM buttons only work in 480p resolution mode when HD JPEG Mode is On. JPEG Interval 1) Press SETUP button. 2) Press / button to select Video. 3) Press button, then the / button to select the JPEG Interval. 4) Press ENTER button, then the / button to shift and change the JPEG Interval. Aspect Ratio : 16 : 9 5) Press ENTER : Auto Fit button. Video Out : HDMI 6) Press SETUP button to exit the HDMI Resolution HD JPEG Mode Off 5 seconds menu. JPEG Interval 10 seconds 15 seconds Off: Plays back one file at a time. 5 seconds: Plays back images in the form of a slide show at 5 seconds interval. 10 seconds: Plays back images in the form of a slide show at 10 seconds interval. 15 seconds: Plays back images in the form of a slide show at 15 seconds interval. Audio : PCM : Off 32 Digital Output Selects the output sound format corresponding to your system connection. 1) Press SETUP button. 2) Press / button to select Audio. 3) Press button, then use the / button to select Digital Output. 4) Press ENTER button, then use the / button to select the output sound format (Off, PCM or Raw). 5) Press ENTER button. 6) Press SETUP Off button to exit the PCM menu. Raw PCM: Select when connected to a Multi-channel digital stereo amplifier. The DVD player outputs sound in the PCM stereo format when you play a DVD recorded on the Dolby Digital, MPEG1 or MPEG2 recording system. Raw: Disc audio raw data will be output. Select "Raw" if your amplifier supports "DTS". Off: To disable Digital Output. Notes • When you make a connection to a TV, Dolby Surround Pro Logic or stereo system via the analog audio jacks, select "PCM" or "Raw". • If this DVD player is connected to a TV using HDMI, make sure to select "PCM". Night Mode Night mode is equivalent to Dynamic Range Compress. When it is On, it reduces the variations between loud and soft sounds in audio output.You can still hear softer sounds and dialog even in very low volume. 1) Press SETUP button. 2) Press / button to select Audio. 3) Press button, then use the / button to select Night Mode. 4) Press ENTER button, then use the / button to select On or Off mode. 5) Press ENTER button. : PCM 6) Press SETUP Off button to exit the On menu. Note Night mode is Dynamic Range Control (DRC) option for analog audio output.