Toshiba TDP-TW420U Owners Manual - Page 19

Using the menus 1 (Continued) ■ The image adjustment menu Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked "Yes", and those that cannot are marked "No". (When an item is masked, it indicates that you cannot select for the current input.) Item Contrast Description Adjust the image contrast. Lower Higher Digital Analog RGB Y/PB/PR RGB Y/PB/PR Video S-video Network USB memory Yes Yes Yes Yes Yes Yes Yes Yes Brightness Adjust the brightness of the image. Darker Brighter Yes Yes Yes Yes Yes Yes Yes Yes Color Adjust the color of the image. Lighter Deeper No Yes No Yes Yes Yes No No Tint*1 Adjust the tint of the image color. Reddish Greenish No No No No Yes Yes No No Sharpness Adjust the sharpness of the image. Softer Sharper No Yes No Yes Yes Yes No No Picture mode Press . Toggle the picture mode with . Bright/Standard/True color Yes Yes Yes Yes Yes Yes Yes Yes Advanced adjustment Press to enter the advanced adjustment Noise Adjust the screen noise reduction*2 reduction level. Yes Yes Yes Yes Yes Yes Yes Yes Softer Stronger R-level Adjust red of the image color. Less red More red Yes Yes Yes Yes Yes Yes Yes Yes G-level Adjust green of the image color. Less green More green Yes Yes Yes Yes Yes Yes Yes Yes B-level Adjust blue of the image color. Less blue More blue Yes Yes Yes Yes Yes Yes Yes Yes NTSC mode*3 Set the black level with . US : NTSC (US) mode No No No No Yes Yes No No JAPAN : NTSC (JAPAN) mode DVI mode*4 Set the connecting device with . PC : connect to PC AV equipment : connect to AV Yes Yes No No No No No No equipment (DVD player) *1: [Tint] can be displayed and adjusted only when the video signal is set to [NTSC] or [NTSC4.43]. *2: [Noise reduction] may not work depending on signal type. *3: [NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or [NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for other languages. *4: If the output settings of the connected device are incorrectly set, black and dark areas of the picture may not be displayed properly. 36 ■ The position adjustment menu Use this menu to set or adjust picture position-related items. Items that can be set or adjusted are marked "Yes", and those that cannot are marked "No". (When an item is masked, it indicates that you cannot select for the current input.) Item Phase Frequency H-position V-position Clamp pulse 1 Clamp pulse 2 Description Digital RGB Y/PB/PR Analog RGB Y/PB/PR Video S-video Network USB memory Adjust to eliminate flicker with No No Yes No No No No No Adjust with to eliminate periodic patterns and flickering when fine vertical lines appear on the screen. No No Yes No No No No No Adjust the horizontal position of the image. No No Yes No No No No No Move left Move right Adjust the vertical position of the image. Move down Move up No No Yes No No No No No Adjust the clamp pulse position. Lower Higher No No Yes No No No No No Adjust the clamp pulse width. Narrower Wider No No Yes No No No No No 37 Operations