Toshiba TDP-TW420U Owners Manual - Page 28

Using the menus 2 (Continued) Note • If you select [Network Projector] in the Setting display (2) menu, the same items in [Network Utility] will be displayed except for the following 2 items. 1 [Easy Connect (USB memory)] feature is not available. 2 In the item [Application], [Password] and [Disconnect] are available as follows. Category Application Item Password Disconnect Description Set password On Off Disconnect while transferring an image using Network Projector. [Yes No] [Enter: ] See "Setting the Network Projector/Network Utility" p.49 to conduct adjustments and settings for Network Projector.  Computer settings Refer to instruction manuals of your computer or wireless LAN adapter to perform the following settings. • Select Ad hoc (for some wireless LAN adapters, this is Peer-to-Peer Group). • Set SSID (for some types of wireless LAN adapter, use Network name instead) as the same as projector's SSID (at factory shipment, this is set to TDPJ). • If Encryption, Network authentication, Key index and Network key are set on the projector, set to the same values. Note • The Easy Connect utility p.73 allows users to easily connect the projector to a computer over wireless networks, without making wireless LAN settings. For Easy Connect support, the computer requires a wireless LAN environment that is NDIS5.1 or higher driver compliant. Refer to the user's manual supplied with the wireless LAN adapter or the wireless LAN embedded computer for more information. 54  The control setting menu This menu sets Projector name, Email function and PJLink function, etc. Select Control setting in step 2 in "Projector settings" p.48 . The following content will be displayed. Item Description Projector name Specify a desired character string (0 to 16 characters). [ or : Enter setting.] [ : Select item.] [ character.] [ to : Set a character.] Confirm: [OK Cancel] [Enter: ] : Move left or right one Email [ : E-mail setting] [ : Select item] Status notification: On Off SMTP server: Enter a character string using numeric keys of the remote control. Port number: Enter a character string using numeric keys of the remote control. Destination address: Enter a character string using numeric keys of the remote control. Confirm: [OK Cancel] PJLink [ : PJLink setting] [ : Select item] PJLink authentication: On Off Password: Enter a character string (1 to 32 characters) using numeric keys of the remote control. Confirm: [OK Cancel] Wireless [ or : Enter setting.] [ : Select item.] [Enabled network Confirm: [OK Cancel] [Enter: ] Disabled]  Detailed description • [Projector name] This can be used to identify projectors when communicating with multiple projectors, or if there is a possibility that another person who is out of communication range will be using the same projector. It is recommended this is set to prevent wrong transmission. • [Email] : Sends alarm information to the specified E-mail address when an error such as lamp blowout occurs. : Set an IP address of the SMTP server. : Enter a port number of the SMTP server. : Enter within 60 characters. (Example: [email protected]) • [PJLink] : Set whether or not to authenticate the user by password when the projector is accessed via the PJLink-compliant Software Application. (Set [On] or [Off].) : Enter a password for confirmation when the above is set to [On]. 55 Network and USB memory