Toshiba TDP-TW420U Owners Manual - Page 25
Using the menus 2, Setup using the Setting display (2)
UPC - 883974104604
View all Toshiba TDP-TW420U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Using the menus 2 Setup using the Setting display (2) Projector settings (Be sure to read this subsection.) Using the factory settings as-is may suffer security damage, so be sure to change the projector settings. 1. Press the NETWORK button and press the MENU button twice 2. Select a Category The Setting display (2) is displayed. * Appears only when Network or USB memory input is selected. Select a category by using . The following 5 categories are available: Network Projector p.49 setup Network utility setup p.49 Control setting p.55 Displays the current settings of selected category. Item shown in gray cannot be set with the currently set conditions of the projector. Slideshow setup p.56 Status display p.58 3. Make settings Press or to open the menu. Item These marks signify the items can be selected from the list by using . After an item is selected, apply it by pressing . The figure shows a typical example. As the display may differ depending on the item, use the following pages as a reference. While the video file transfer function of Network Utility or the slideshow function is in use, the background image of the Setting display (2) does not appear. 4. Back RETURN button 5. End Press the MENU button or RETURN button. (The menu disappears 30 seconds after the last operation is conducted.) 48 Setting up the Network Projector/Network Utility If you select Network Utility, the following items can be set. Category Item Description Wireless LAN Easy Connect (USB memory) [Yes No] [Enter: ] LAN settings Mode: Ad hoc Infrastructure SSID: Specify a desired character string (1 to 32 characters). [ : Move left or right one character.] [ to : Set a character.] DHCP: Use Not use IP address: Enter using the numeric keys of the remote control. [ : Move left or right one character.] [ to : Set a character.] Subnet mask: Enter using the numeric keys of the remote control. [ : Move left or right one character.] [ to : Set a character.] Gateway: Enter using the numeric keys of the remote control. [ : Move left or right one character.] [ to : Set a character.] Confirm: [OK] [Cancel] [Enter: ] Security Network authentication: Network Authentication Setting [ or : Enter setting] [ : Selection] [Enter: ] None/Open/Shared/WPA-PSK/WPA2-PSK Encryption: Select an encryption type using the Off/WEP/TKIP/AES button. Key index: Select a desired number (1 to 4) using the buttons. Network key: Specify a desired character string. (WEP: 5 to 13 characters, or 10 to 26 digits in hexadecimal notation) (TKIP/AES: 8 to 63 characters, or 64 digits in hexadecimal notation) [ : Move left or right one character.] [ to : Set a character.] Confirm: [OK] [Cancel] [Enter: ] Setting Reset all the wireless LAN settings. Iinitialization Confirm: [Yes] [No] [Enter: ] Wired LAN LAN settings DHCP: Use Not use IP address: Enter using the numeric keys of the remote control. [ : Move left or right one character.] [ to : Set a character.] Subnet mask: Enter using the numeric keys of the remote control. [ : Move left or right one character.] [ to : Set a character.] Gateway: Enter using the numeric keys of the remote control. [ : Move left or right one character.] [ to : Set a character.] Confirm: [OK] [Cancel] [Enter: ] * To enter characters, use the numeric keypad on the remote control. 49 Network and USB memory