Toshiba TDP-TW420U Owners Manual - Page 48
Troubleshooting, Others
UPC - 883974104604
View all Toshiba TDP-TW420U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Troubleshooting If you think something is wrong, check the followings before contacting customer service. Please see "Trouble indications" p.93 as well. If This Happens Check No power • Is the power cord plugged in? Is it connected to the projector? • Is the main power switch turned on? p.24 • Is the outer lamp cover attached properly? p.90 Power goes out • Is the ambient temperature high? p.93 during use • Is the air intake or air exhaust blocked? p.93 No picture • Is the input source selected correctly? (When [Auto input search] is [Off]) p.41 • Is the mute function on? p.32 • Is the brightness setting minimized? p.36 • Are the connections set up correctly? p.22 p.23 • Are all the connected devices functioning properly? No audio • Is the mute function on? p.32 • Is the volume setting minimized? p.27 • Are the connections set up correctly? p.22 p.23 • Are all the connected devices functioning properly? Picture not displayed correctly • Is the input signal supported by the projector? p.97 p.98 • Is there something generating an abnormal video signal, for instance the video tape? Picture blurred Part of picture out of focus • Is the lens dirty? p.92 • Is the lens focus adjusted optimally? p.27 • Is the projection distance within the projector's supported range? p.21 • Is the projector's screen placement angle tilted too far? p.21 • Are the sharpness or sampling phase adjustments off? p.36 p.37 Image is dark • Are the brightness or contrast adjustments off? p.36 • Is the lamp nearing the end of its service life? p.43 Colors too light Bad shading • Are the color, tint, R-level, G-level, or B-level adjustments off? p.36 • Is the screen dirty? • Is the blackboard mode set properly? p.41 • Is the lamp nearing the end of its service life? p.43 Control panel key • Is the key lock function on? p.43 doesn't work If This Happens Check Remote control doesn't work • Is the remote control code identical with the projector's code? p.42 • Are the remote control's batteries drained? • Are the batteries inserted into the remote control correctly? p.19 • Is the remote control being used within the effective range? p.19 • Are there any obstructions between the remote control and projector? • Are there any fluorescent or other bright lights shining at the projector's infrared remote sensor? USB device images aren't projected • Is the USB memory inserted correctly? • Is a USB memory not supported by the projector inserted? p.47 • Are there any JPEG or MPEG files saved on the USB memory? • Are the files too large or in an unsupported format for the projector? For JPEG files, convert them with the supplied software application. p.81 The wireless LAN • Are the transmission mode, SSID, etc. properly configured? doesn't work • Are there any obstructions between the computer and the projector? • Do your computer and OS support the supplied software application? p.60 Others 94 95