Tripp Lite 5P3000 Eaton 5P1500RT 5P2200RT 5P2200 5P3000RT 5P3000 UPS Installat - Page 16

3. Installation 3.5 Communication ports Connection of RS232 or USB communication port (optional) The RS232 and USB communication ports cannot operate simultaneously. 1. Connect the RS232 16 or USB 17 communication cable to 17 the serial or USB port on the computer equipment. 2. Connect the other end of the 16 communication cable 16 or 17 to the USB 1 or RS232 2 communication port on the UPS. The UPS can now communicate with EATON power management software. Installation of the communication cards (optional, standard on the Netpack versions) It is not necessary to shutdown the UPS before installing a communication card. 1. Remove the slot cover 4 secured by screws. 2. Insert the communication card in the slot. 3. Secure the card cover with the 2 screws. Characteristics of the contact communication port (optional) pp Pins 1, 3, 4, 5, 6, 10: not used pp Pin 2: common (user) pp Pin 7: low battery pp Pin 8: operation on battery power pp Pin 9: UPS ON, equipment supplied n.o.: normally open contact Page 16 When a signal is activated, the contact is closed between the common (pin 2) and the pin for the corresponding signal. Contact characteristics (optocoupler) pp Voltage: 48 V DC max pp Current: 25 mA max pp Power: 1.2 W 614-03898-00_EN