Tripp Lite 5P3000 Eaton 5P1500RT 5P2200RT 5P2200 5P3000RT 5P3000 UPS Installat - Page 23
Maintenance on a UPS equipped with the HotSwap MBP module
View all Tripp Lite 5P3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ENGLISH 5. Maintenance Mounting the new battery module Carry out the above instructions in reverse order. pp To ensure safety and high performance, use only batteries supplied by EATON. pp Take care to firmly press together the two parts of the connector during remounting. 5.3 Maintenance on a UPS equipped with the HotSwap MBP module 5P The HotSwap MBP module makes it possible to service or even replace the UPS without affecting the connected loads (HotSwap function). Maintenance 1. S et switch 31 to Bypass position. The red LED on the HotSwap MBP module goes ON, indicating that the load is supplied directly with AC input source power. 32 33 2. S top the UPS by pressing the button on the UPS control panel. HotSwap MBP LED 29 "UPS ON - OK to switch" goes OFF, the UPS can now be disconnected and replaced. UPS IN AC POWER ByPass UPS OUT Normal UPS ON OK to switch Return to normal operation 28 29 30 311. C heck that connected the UPS is correctly to the HotSwap MBP module. 2. Start the UPS by pressing the button on the UPS control panel. 34 LED 29 "UPS ON - OK to switch" on the HotSwap MBP module goes ON (otherwise, there is a connection error between the HotSwap MBP module and the UPS). 3. Set switch 31 to Normal position. The red LED on the HotSwap MBP module goes OFF. 614-03898-00_EN Page 23