Tripp Lite 5P3000 Eaton 5P1500RT 5P2200RT 5P2200 5P3000RT 5P3000 UPS Installat - Page 17
Connection with a FlexPDU Power Distribution Unit module, 7 Connection with a HotSwap MBP module
View all Tripp Lite 5P3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ENGLISH 3. Installation 3.6 Connection with a FlexPDU (Power Distribution Unit) module (optional) 5P 1. Connect the UPS powercord 10 to the AC-power source. 2. Connect the input cord of the FlexPDU module 27 to one of the UPS outlets 9 . The cable and the connectors are marked in red. FlexPDU 3. Connect the equipment to the outlets 25 and 26 on the FlexPDU module. These outlets differ, depending on the version of the FlexPDU module. 25 26 27 3.7 Connection with a HotSwap MBP module (optional) The HotSwap MBP module makes it possible to service or even replace the UPS without affecting the connected loads (HotSwap function). 1. Connect the input socket 34 on 5P the HotSwap MBP module to the AC-power source. 2. Connect the UPS input socket 10 to the "UPS Input" 33 of the HotSwap MBP module. This cord and the receptacle are marked blue. HotSwap MBP 32 33 Normal ByPass UPS OUT UPS IN AC POWER 3. Connect the UPS outlet 7 to the "UPS Output" 32 of the HotSwap MBP module. This cord and the outlet are marked red. 4. Connect the equipment to the outlets 28 on the HotSwap MBP module. UPS ON OK to switch 28 29 30 31 These outlets differ, depending on the version of the HotSwap MBP module. Caution: Do not use UPS outlets 8 34 and 9 to supply equipment because use of switch 31 on the HotSwap MBP module would cut supply to the equipment. 614-03898-00_EN Page 17