Tripp Lite SU40KX Owner's Manual for 3-Phase UPS 932688 - Page 22
Operating Modes
View all Tripp Lite SU40KX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
8 - Operating Modes 1 This section provides a basic description of the UPS system's operating modes. For more information about switching between operating modes, refer to Section 9 - Start-Up, Shutdown and Bypass. 2 8-1 Online (Normal) Mode (Single UPS) In online (normal) mode, the UPS system's rectifier converts incoming AC utility power to DC power that charges the batteries and supplies the 3 inverter. The inverter transforms the DC power to precision-regulated, pure sine wave AC power that supports the operation of connected equipment. This dual conversion technology isolates connected equipment from all power problems and ensures that connected equipment receives ideal power at all times. 4 8-2 Battery Backup Mode (Single UPS) 5 When a blackout or other extreme power event occurs, the UPS system automatically switches from normal mode to battery backup mode. The UPS system's batteries (internal and/or external) provide emergency DC power to the inverter. The inverter transforms the DC power 6 to precision-regulated, pure sine wave AC power that supports the operation of connected equipment. 7 8-3 Auto Bypass Mode (Single UPS) If the inverter malfunctions due to excessive temperature, overload, 8 output short circuit, abnormal voltage or battery problems, the inverter will shut down. If the UPS system detects a bypass (reserve) power source that conforms to normal parameters, then the UPS system automatically switches to auto bypass mode to continue supplying power to connected equipment. When all problems are eliminated, the 9 UPS system switches back to online (normal) mode automatically. 10 8-4 Manual Bypass Mode (Single UPS) If UPS system maintenance or repair is required, you can bypass the UPS system and enable bypass (reserve) power manually. After 11 confirming that bypass power is present, stop the inverter by pressing the OFF button and answering "YES" to the question "Transfer to Bypass Mode?" (this transfers the UPS to static bypass), then switch the UPS system into manual bypass mode. (See Section 9-5 for complete manual bypass procedure.) This allows service technicians to perform 12 maintenance or repair jobs without interrupting the flow of AC power to connected equipment. Warning: The UPS system must be de- energized completely before performing maintenance or repair by shutting it down completely after switching it to manual bypass mode. 13 14 22