Troy-Bilt CSV 060 Operation Manual - Page 10
Controls and Features - yard vacuum
View all Troy-Bilt CSV 060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Controls and Features 4 Recoil Starter Bag Hose Handle Hose Extension Chipper Chute Nozzle Height Adjustment Lever Hose Assembly Nozzle/Hose Vac Lever Nozzle Figure 4-1 WARNING: The operation of any chipper shredder can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear the safety glasses provided with this unit or eye shields while operating or while performing any adjustments or repairs. Hose Assembly Used as an alternative to the nozzle to vacuum yard waste such as leaves or pine needles. See Fig. 4-1. Hose Extension Chipper Chute Allows twigs and small branches up to 1-1/2" in diameter to be fed into the impeller for chipping. See Fig. 4-1. Nozzle Height Adjustment Lever Used to adjust the nozzle ground clearance ranging approximately 5/8" to 4 1/8". Used to vacuum yard waste in hard to reach places of yard. Nozzle/ Hose Vac Lever The nozzle/hose vac handle is located on top of the nozzle. Use it to switch vacuum suction between the nozzle and the hose assembly. Hose Handle Nozzle Yard waste such as leaves or pine needles can be vacuumed up through the nozzle for shredding. Used to guide hose assembly when vacuuming. Recoil Starter The recoil starter is attached to the right upper handle. Stand behind unit and pull the recoil starter to start engine. 10