Troy-Bilt CSV 060 Operation Manual - Page 14
Removing the Flail Screen - chipper shredder vacuum
View all Troy-Bilt CSV 060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Removing the Flail Screen If the discharge area becomes clogged, remove the flail screen and clean area as follows: 6. Remove and clean the screen by scraping or washing with water. See Fig. 6-3. 1. Stop the engine. Make certain the chipper/shredder vacuum has come to a complete stop. 2. Before unclogging the discharge chute, disconnect and ground the spark plug wire to retaining post. 3. Remove the vacuum bag from the unit as instructed in the OPERATION section to obtain access to flail screen. 4. Remove self tapping screw on right side of unit that attaches to the flail screen. See Fig. 6-2. Figure 6-3 7. Reinstall the screen. Figure 6-2 5. Remove hex screw on top of rear housing near mounting bracket and the flange lock nut that secures flail screen. See Fig. 6-2. 14 Section 6- Maintenance & Adjustments