Uniden BCD260DN English Owners Manual - Page 49
Priority Scan
View all Uniden BCD260DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
NOTE: If you want to leave a SRCH key blank (unassigned), select Not Assign. An error tone sounds if you select a SRCH key that has nothing assigned. PRIORITY SCAN NOTE: Set up channels first to be Priority channels in order to use Priority Scan. See page 36 to set a channel as a Priority channel. Priority Scan works in both Scan and Scan Hold mode. Based on the priority check interval setting (see page 50), the BCD260DN interrupts scanning banks to check priority channels for activity. The more priority channels, the longer the interruption. The scanner cannot scan over 100 priority channels at the same time. The bank(s) containing priority channels need to be enabled and unlocked or the scanner displays Priority Scan No Channel and an error tone will sound. Press any key to return to scan mode. Hold on a channel or frequency. Then, from MENU, select PRIORITY SCAN. Set Priority Select one of the following Priority Scan modes: • Off: The Priority feature is off. • On: The scanner checks priority channels every 2 seconds. The PRI icon displays. • Plus On: The scanner only scans priority channels in enabled banks. The PRI icon blinks. 49