Uniden BCD260DN English Owners Manual - Page 59
L/O t, Max Hold Search Mode MAX, SCAN/SEARCH
View all Uniden BCD260DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
The center frequency marker flashes during Searching and Max Hold Searching. When you move the marker with the Scroll knob, the frequency of the signal strength bar displays above the marker. When you turn the Scroll knob, the marker usually moves according to the preset step (STP). (See page 61 to change the search step.) If the sweep range is set wide, a single bar will contain multiple frequency ranges. This is why the marker moves slowly even when you turn the Scroll knob. If you want to pinpoint the frequency, set the span range narrower. (See page 61 to change the span range.) NOTE: If you want to the listen to the signal at the marker position, see page 59. NOTE: When scanning a band with a wide occupied frequency such as FM broadcast, multiple bars appear due to the separation. Press the FUNC knob then L/O to move the marker back to the center frequency position. Doing this clears the history and restarts scanning from the beginning. Max Hold Search Mode (MAX) If you want to switch to MAX Hold Search mode, press the FUNC knob + SCAN/SEARCH to toggle between SRCH mode and MAX Hold Search mode. MAX Mode "Max" shows in the display and will freeze the signal strength bars at their strongest signals. To toggle between Search mode and Max Hold Search mode, press the FUNC knob + SCAN/SEARCH. 59