Uniden BCD260DN English Owners Manual - Page 61
Set Current Frequency Marker Position to Center Frequency, Change the Search Span Range, Change
View all Uniden BCD260DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Set Current Frequency Marker Position to Center Frequency 1. Press . No until CF blinks. 2. To set the frequency at the frequency marker position as the center frequency, press E Yes. The Edit Center Freq menu displays. 3. Use the keypad to enter the center frequency; press L/O to exit if there are no additional settings. Change the Search Span Range 1. To change the search span, press . No until SPN is blinking. 2. Turn the Scroll knob to select 0.2 - 500 MHz; press L/O to exit. Set a span of 100, CF is at 50. Change the Search Step 1. To change the search step, press . No until STP is blinking. 2. Turn the Scroll knob to change the search step options on the screen. Stop at the desired search step. 3. Press L/O to exit. Change Modulation 1. Press the FUNC knob + 9 MOD to access the modulation options. Keep pressing 9 MOD quickly to cycle through the options. Normally, use the default AUTO. NOTE: When set to AUTO, a default modulation is automatically selected for each frequency. 2. When you see the step setting you want, stop pressing 9 MOD. Change Attenuation 1. Press the FUNC knob + 7 ATT to toggle the attenuator on or off. Keep pressing 7 ATT quickly to cycle through On and Off. 61