Uniden BCD260DN English Owners Manual - Page 53
Set Delay Time, Set Attenuator, Set Record
View all Uniden BCD260DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2. At Select SAME, scroll to a SAME group (1-5) and press E Yes. 3. Select Edit Name to change the default SAME name from SAME X to another name. Press E Yes. 4. Select Edit County and press E Yes. Code number selections display. 5. Select a code number (No. 1 - No. 8) and press E Yes. 6. At Edit FIPS Code, enter the FIPS code and press E Yes to save and exit. 7. Scroll to the next code number and repeat. 8. Press MENU twice to return to the Select Same screen and select a different SAME group. 9. Press MENU to save and exit. SET DELAY TIME Sets the number of seconds the scanner should wait after a transmission stops before moving on to the next channel during weather scan. A negative delay will force a resume after that number of seconds. The default setting is 2 seconds. 1. Scroll to MENU/WX Operation/Set Delay Time and press E Yes. 2. Scroll to the desired delay time (-10, -5, -2, 0, 1, 2, 5, 10, or 30 secs.), then press E Yes to save and exit. SET ATTENUATOR Sets the attenuator (20 dB) for weather operation. The default setting is Off. 1. Scroll to MENU/WX Operation/Set Attenuator and press E Yes. 2. Select On or Off and press E Yes to save and exit. NOTE: You can also toggle attenuation for weather scan by pressing the FUNC knob then 7 ATT. 3. Press MENU to return to the previous menu. SET RECORD This setting allows a live audio output from the Record Out Jack (REC) to an audio recording device. 1. From MENU/WX Operation, scroll to Set Record and press E Yes. The Set Record screen displays. 2. Select On to allow the scanner to output audio to a connected recording device or Off to not allow audio output. 53