Uniden BCD260DN English Owners Manual - Page 60
HOLD Mode HOLD, Change Center Frequency, E Yes
View all Uniden BCD260DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
HOLD Mode (HOLD) HOLD Mode "HOLD" displays and allows you hold the sweep then scroll to and listen to that frequency. You can use the Scroll knob to move the frequency marker to other locations, including the center frequency, and listen to that frequency. To toggle between Hold mode and Search/Max Hold Search mode, press HOLD. Center frequency marker stops flashing in Hold mode. NOTE: If the sweep range is set wide, a single signal bar will contain multiple frequency ranges. This is why the marker moves slowly even when you turn the Scroll knob. If you want to pinpoint the frequency, set the span range narrower. (See page 61.) NOTE: With MAX hold, the signal bar remains visible even with short duration signals. Therefore, even if you move the marker to that frequency, you may not be able to receive the signal because this is past information. To return the marker to the center frequency position while in HOLD mode, press the FUNC knob then L/O. Press HOLD to return to Search mode. Change Center Frequency SPN (Search Span) Hz CF (Center Freq) MHz STP (Search Step) Hz Enter a Specific Frequency 1. To change the center frequency, press . No until CF is blinking then press E Yes. The Edit Center Freq menu displays. 2. Use the keypad to enter the new center frequency. Press E Yes to save and exit. NOTE: Setup mode automatically times out if there is no input for 10 seconds. 60