Uniden BCD260DN English Owners Manual - Page 62
Settings
View all Uniden BCD260DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
NOTE: Press and hold 7 ATT to set global attenuation status. ATT blinks when global attenuation is set. 2. When you see the setting you want, stop pressing 7 ATT. NOTE: Press the FUNC knob to check the current modulation mode and attenuator settings. SETTINGS SET BACKLIGHT There are 5 different ways to use the backlight and 3 light intensities. 1. From MENU/Settings, select Set Backlight and press E Yes. The Set Backlight menu displays. 2. Scroll to Set Dimmer and press E Yes to select it. The Set Dimmer screen displays. 3. Select Auto (to set positive or negative polarity) or Manual (to set backlight intensity to High, Middle, Low, or Off). Press E Yes to select it, and then press MENU to return to the Settings menu. See page 26 for detailed procedures. SET RX LED Set RX LED to On for the BLUE LED to turn on when receiving a signal. See page 27 for detailed procedures. ADJUST KEY BEEP This setting turns key beep on and off and adjusts its volume level. 1. From MENU/Settings, scroll to Adjust Key Beep and press E Yes. The Adjust Key Beep screen displays. 2. Key beep options are Auto (the scanner sets the alert beep to the master volume level), Level 1 - Level 15 (the scanner sounds the level as you scroll through the levels), and Off. Scroll to a selection and press E Yes to select it and return to the Settings menu. See page 27 for detailed procedures. 62