Uniden BCD260DN English Owners Manual - Page 54
Wx Alert Alt Priority
View all Uniden BCD260DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
WX ALERT (ALT) PRIORITY Turning on weather alert priority allows the scanner to check weather channels every 5 seconds for a 1050 Hz weather alert signal and still scan or search. If you receive an alert, you will hear a loud warbling sound and then the weather channel audio. WX displays when Weather Alert Priority is on. WARNING! Alert notifications are broadcast at full volume. 1. Scroll to WX Alt Priority and press E Yes. On and Off display. 2. Select On or Off and press E Yes to save and exit to the WX Operation screen. NOTE: Press the WX key to toggle WX Alert Priority in Search and Scan modes. TONE-OUT FOR... This feature allows the scanner to monitor up to 10 different channels for paging tones: • Two-tone sequential • Single tone • Group tone NOTE: Use Tone-Out Standby mode if you know and use programmed tones. Use Tone-Out Search Mode if you do not know and use programmed tones. 1. Go to MENU/Tone-Out for...and press E Yes. The Tone-Out for... screen displays 2 options: Select Tone-Out Standby if you know and use programmed tones. The active Tone-Out Search screen displays. Select Tone-Out Setup if you don't know the tones. 2. Scroll to Tone-Out Setup, and press E Yes. The Select Tone-Out screen displays 10 Tone-Out options. 3. Scroll to Tone-Out X and press E Yes. Six settings for the specified Tone- Out display: • Edit Name • Set Frequency • Set Tone • Set Delay Time • Set Alert • Set Record 54