Uniden BCT7 English Owners Manual - Page 8
How Squelch Works, Setting the Squelch
View all Uniden BCT7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
How Squelch Works Think of "SQUELCH" as a gate. If the gate is too low (squelch too low), everything (all noise as well as signals) gets through. If the gate is set too high (squelch too high), nothing gets through. If the gate is set just right (squelch set properly), just the desired signals get through. Setting the Squelch No signal should be present when setting Squelch. Press H to stop scanning. If needed, press < or > until you do not hear a signal. Á Turn until hiss heard. This lowers the "squelch gate," allowing all signals and noise to get through. Á Turn just until hiss stops. This raises the "squelch gate," allowing only strong signals to get through. Turn Turn SQ SQ PUSH FLASH PUSH FLASH In the city, you may want to adjust Squelch even further counterclockwise to decrease the range of the Warning Alert. This prevents the alert from sounding unnecessarily due to farther, less important sources. 8