Uniden EXAI2980 English Owners Manual - Page 10
Battery use time per charge, Low battery alert, Cleaning the battery charging contacts
View all Uniden EXAI2980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
• Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after each telephone call for charging the battery. • If you must replace the battery pack during a telephone call, complete the replacement within 30 seconds, and you may return to the caller. Battery use time (per charge) From fully charged • Seven hours continuous use. • Fourteen days when the handset is in the standby mode. Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, "Low Battery" appears on the LCD and none of the keys will operate. If the phone is in use, "Low Battery" flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging. The last number dialed in the redial memory and the numbers stored in the memory locations are retained for up to 30 minutes while you replace the battery pack. Cleaning the battery charging contacts To maintain a good charge, it is important to clean the battery contacts on the handset and base unit with a dry cloth or a pencil eraser about once a month. Do not use any liquids or solvents. [ 8 ] GETTING STARTED