Uniden EXAI2980 English Owners Manual - Page 13
Mounting the Base Unit on a Wall
View all Uniden EXAI2980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Mounting the Base Unit on a Wall Setting the handset retainer clip for wall mounting 1)On the base unit, pull the handset retainer clip out of the slot and rotate it clockwise 180 degrees. 2)Flip the retainer clip from front to back. Slide it back into the slot so that the lip of the retainer is up and the w is down. The retainer holds the handset in place. Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Snap the wall mount adapter into the notches on the base. 2) Plug the the AC adapter to the DC IN 9V jack. 3) Wrap the AC adapter cord inside the molded wiring channel as shown. 4) Plug the AC adapter into a standard 120V AC wall outlet. 5)Place the handset on the base and charge for 15-20 hours. 6) Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel as shown. 7) Plug the telephone line cord into the telephone outlet. DO NOT use an outlet controlled by a wall switch. If you have wall mounted the base, you have to remove the beltclip to hang the handset with the display facing forward. G E T T I N G S T A R T E D [ 11 ] GETTING STARTED