Uniden EXAI2980 English Owners Manual - Page 14
Direct wall mounting
View all Uniden EXAI2980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
8)Raise the antenna to a vertical position. 9) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Tr y to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed. 1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apar t. Allow about 1/8 of an inch between the wall and screw heads for mounting the phone. 2)Set the retainer clip if necessary. 3) Refer to steps 1 through 9 on page 11 and 12 to mount the telephone. [ 12 ] G E T T I N G S T A R T E D