Via VB8001-16 User Manual - Page 40
IDE Primary Master/Slave, IDE Primary Slave, Access Mode, Capacity, Cylinder, Precomp, Landing Zone
View all Via VB8001-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
BIOS Setup IDE Primary Master/Slave Press to enter the sub-menu and the following screen appears: The specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. Select Auto whenever possible. If you select Manual, make sure the information provided is from your hard disk vendor or system manufacturer. IDE Primary Slave Access Mode Capacity Cylinder Head Precomp Landing Zone Sector PIO Mode Ultra DMA Mode The settings are None, Auto, Manual. The settings are CHS, LBA, Large, Auto. The formatted size of the storage device. Number of cylinders. Number of heads. Write precompensation. Cylinder location of the landing zone. Number of sectors. The settings are Mode 0/1/2/3/4, Auto. The settings are Disabled and Auto. 3-7