Via VB8001-16 User Manual - Page 42

Boot Other Device, Swap Floppy Drive, Boot Up Floppy Seek, Boot Up NumLock Status, Gate A20 Option

Get Via VB8001-16 - VIA Motherboard - Mini ITX PDF manuals and user guides View all Via VB8001-16 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

BIOS Setup Floppy LS120 HDD-0 SCSI CD-ROM HDD-1 HDD-2 HDD-3 ZIP100 USB-FDD USB-ZIP USB-CDROM USB-HDD LAN Disabled The system will boot from floppy drive. The system will boot from LS-120 drive. The system will boot from first HDD. The system will boot from SCSI. The system will boot from CD-ROM. The system will boot from second HDD. The system will boot from third HDD. The system will boot from fourth HDD. The system will boot from ATAPI ZIP drive. The system will boot from USB floppy drive. The system will boot from USB ZIP drive. The system will boot from USB CDROM. The system will boot from USB HDD. The system will boot from network drive. Disable this sequence. Boot Other Device Enable the system to boot from other devices if the system fails to boot from the First/Second/Third boot device. Settings: Enabled and Disabled. Swap Floppy Drive If the system has two floppy drives, choose enable to assign physical drive B to logical drive A and vice-versa. Settings: Enabled and Disabled. Boot Up Floppy Seek Set floppy seek during POST, BIOS will determine whether the floppy is 40 or 80 tracks. Settings: Enabled and Disabled. Boot Up NumLock Status Set the NumLock status when the system is powered on. "On" will turn key pad into number keys, and "Off" will turn key pad into arrow keys. Settings: On and Off. Gate A20 Option The option, Fast, allows the chipset to control Gate A20, and the Nomal option makes a pin in the keyboard controller control Gate A20. Settings: Fast and Normal. 3-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
BIOS Setup
3-9
Floppy
The system will boot from floppy drive.
LS120
The system will boot from LS-120 drive.
HDD-0
The system will boot from first HDD.
SCSI
The system will boot from SCSI.
CD-ROM
The system will boot from CD-ROM.
HDD-1
The system will boot from second HDD.
HDD-2
The system will boot from third HDD.
HDD-3
The system will boot from fourth HDD.
ZIP100
The system will boot from ATAPI ZIP drive.
USB-FDD
The system will boot from USB floppy drive.
USB-ZIP
The system will boot from USB ZIP drive.
USB-CDROM
The system will boot from USB CDROM.
USB-HDD
The system will boot from USB HDD.
LAN
The system will boot from network drive.
Disabled
Disable this sequence.
Boot Other Device
Enable the system to boot from other devices if the system fails to boot from
the First/Second/Third boot device. Settings:
Enabled
and
Disabled
.
Swap Floppy Drive
If the system has two floppy drives, choose enable to assign physical drive B
to logical drive A and vice-versa. Settings:
Enabled
and
Disabled.
Boot Up Floppy Seek
Set floppy seek during POST, BIOS will determine whether the floppy is 40 or
80 tracks. Settings:
Enabled
and
Disabled
.
Boot Up NumLock Status
Set the NumLock status when the system is powered on. “On” will turn key
pad into number keys, and “Off” will turn key pad into arrow keys. Settings:
On
and
Off
.
Gate A20 Option
The option, Fast, allows the chipset to control Gate A20, and the Nomal op-
tion makes a pin in the keyboard controller control Gate A20. Settings:
Fast
and
Normal
.