Viper 350 Plus Owner Manual - Page 16

➢ Silent mode To temporarily turn off the arm or disarm chirps, use Silent Mode™. Press for less than one second before arming or disarming, and the confirmation chirp(s) will be eliminated for that one op­er­ a­tion only. If you want the arm/disarm chirps turned off perma- nently, your dealer can do this for you. The Warn Away® response to lighter impacts is bypassed if the system is armed using Silent Mode. This ensures that no chirps will be emitted by the siren in an area you want chirp-free. The system is still fully capable of triggering, only the Warn Away® response is bypassed. ➢ Panic mode If you are threatened in or near your vehicle, you can attract atten- tion by triggering the system with your transmitter. Just press for two seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for the programmed siren duration. To stop Panic Mode at any time, press on the remote transmitter again. ➢ Valet mode You can prevent your security system from automatically arming and trigg­ er­ing by using Valet Mode. This is very useful when washing the ve­hi­cle or having it serviced. In Valet Mode, the security system will not arm, even with the remote trans­mit­ter, but all convenience functions (door locks, trunk re­lease, etc.) will con- tinue to work nor­mall­y. 14 © 2008 Directed Electronics- All rights reserved.