Viper 350 Plus Owner Manual - Page 25
Programming options - parts
View all Viper 350 Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Programming options Programming options control what your system does during normal operation, and require few or no additional parts. However, some may require additional installation labor. The following is a list of the program settings, with the factory settings in Bold: • Active arming (only with the transmitter) or passive arming (automatic arming 30-seconds after the last door has been closed). • Arming/disarming confirmation siren chirps on or off. • The ignition controlled door lock feature on or off: With this feature on, the doors will lock three seconds after the ignition is turned on, and unlock when the ignition is turned off. The system will not lock the doors when the ignition is turned on with any door open. If your installer is programming the security system with the Directed Bitwriter, ignition lock and unlock are independent features and can be programmed separately. • Passive door locking (with passive arming) or active door locking (only when arming with the transmitter). Passive locking allows the vehicle's doors to lock when the security system passively arms (after the 30 second countdown). This feature only works if passive arming has been programmed. Note: When programmed for passive arming and active lock, if the system is disarmed without a door being opened, the system will relock the doors when it passively rearms. © 2008 Directed Electronics - All rights reserved. 23