Viper 350 Plus Owner Manual - Page 32

➢ Disarming the VRS Take the time to familiarize yourself with the VRS® trig­geri­ng se­ quence and the disarm pro­ce­dure. It is important to recognize and identify the VRS trigger sequence and know how to disarm it in case of acc­ i­den­tal activation. Once the VRS is armed, it does not disarm aut­om­ at­i­cal­ly. You must disarm it the next time you operate the vehicle. You must dis­arm it with one of the foll­owi­ng pro­ced­ ures: If the system has not entered the triggered sequence (siren has not started chirping): 1. Turn the ignition on. 2. Press on the transmitter for one second. The lights will flash and the siren will chirp twice. If the system has entered the triggered sequence (siren has begun chirping), pressing the disarm button of the trans­mit­ter will not disarm VRS. To disarm the VRS during a VRS trigger sequence: 1. Turn the ignition on. 2. Press the Valet switch the pre-programmed number of times to disarm the VRS system. Note: If the VRS system has begun its chirping sequence, the ignition must be turned off, then on to disarm. If you are driving the vehicle at the time, pull to a safe place away from traffic and follow the triggered sequence disarm procedure. 30 © 2008 Directed Electronics- All rights reserved.