Weider Pro 550 Bench Uk Manual - Page 7

Nylon Locknuts yet.

Get Weider Pro 550 Bench PDF manuals and user guides View all Weider Pro 550 Bench manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

2. Attach the Crossbar (5) to the Left Upright Base 2 (3) with two M10 x 93mm Bolts (66), two M10 Washers (43), and two M10 Nylon Locknuts (58). Do not tighten the Nylon Locknuts yet. Repeat this step with the Right Upright Base (not shown). 3. Slide the Left Upright (31) onto the Left Upright 3 Base (3). Attach the Left Rear Support (6) to the Left Stabilizer (1) with the indicated M10 x 50mm Carriage Bolts (67) and two M10 Nylon Locknuts (58). Do not tighten the Nylon Locknuts yet. Attach the Left Rear Support (6) to the Left Upright (31) and the Left Upright Base (3) with two M10 x 60mm Bolts (68), the Left Upright Plate (15), and two M10 Nylon Locknuts (58). Finish attaching the Rear Support with an M10 x 93mm Bolt (66), two M10 Washers (43), and an M10 Nylon Locknut (58). Do not tighten the Nylon Locknuts yet. Repeat this step with the Right Upright (not shown) and the Right Rear Support (not shown). 4. Attach the Front Leg (12) to the Front Stabilizer 4 (11) with two M10 x 93mm Bolts (66) and two M10 Nylon Locknuts (58). Do not tighten the Nylon Locknuts yet. 7 66 5 66 3 43 43 58 31 66 58 43 6 68 15 43 58 58 58 3 1 67 12 58 66 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
7
2.
Attach the Crossbar (5) to the Left Upright Base
(3) with two M10 x 93mm Bolts (66), two M10
Washers (43), and two M10 Nylon Locknuts
(58).
Do not tighten the Nylon Locknuts yet.
Repeat this step with the Right Upright
Base (not shown).
3.
Slide the Left Upright (31) onto the Left Upright
Base (3).
Attach the Left Rear Support (6) to the Left
Stabilizer (1) with the indicated M10 x 50mm
Carriage Bolts (67) and two M10 Nylon
Locknuts (58).
Do not tighten the Nylon
Locknuts yet.
Attach the Left Rear Support (6) to the Left
Upright (31) and the Left Upright Base (3) with
two M10 x 60mm Bolts (68), the Left Upright
Plate (15), and two M10 Nylon Locknuts (58).
Finish attaching the Rear Support with an M10
x 93mm Bolt (66), two M10 Washers (43), and
an M10 Nylon Locknut (58).
Do not tighten the
Nylon Locknuts yet.
Repeat this step with the Right Upright (not
shown) and the Right Rear Support (not
shown).
4.
Attach the Front Leg (12) to the Front Stabilizer
(11) with two M10 x 93mm Bolts (66) and two
M10 Nylon Locknuts (58).
Do not tighten the
Nylon Locknuts yet.
2
4
3
12
58
3
58
43
66
66
43
5
66
3
67
1
11
66
15
58
58
58
58
6
31
43
43
68