Weider Pro 9725 English Manual - Page 10
Tighten
View all Weider Pro 9725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
18. Route the Medium Cable (23) around the "V"Pulley (6) on the Right Arm (48). Be sure 18 that the Cable is in the groove of the "V"- Pulley and that the Long Cable Trap (50) is turned to hold the Cable in place. Tighten the 3/8" x 2 1/2" Bolt (7) and the 3/8" Nylon Locknut (not shown). 7 O 6 23 50 48 19. Route the Medium Cable (23) around the 3 1/2" Pulley (15) attached to the Pulley 19 Bracket (20). Be sure that the Cable is in the groove of the Pulley and that the Cable Trap (66) is turned to hold the Cable in place. Tighten the 3/8" x 2" Bolt (12) and the 3/8" Nylon Locknut (not shown). Be sure that the 5/16" x 5" Bolt (68) is properly tightened and that the Pulley Bracket (20) can move freely. 20. Route the Medium Cable (23) around one of 20 the 3 1/2" Huileys (15) attached to the "r' Plates (81). Be sure that the Cable is in the CO groove of the Pulley and that the Cable and Pulley move smoothly. 68 20 66 12 15 23 23 O 15 81 O 10