Weider Pro 9725 English Manual - Page 15
Weider Pro 9725 Manual
View all Weider Pro 9725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
35. Route the Long Cable (86) around the indicat- 35 ed 3 1/2" Pulley (15) and through the Long "U"-Bracket (57). The Cable must be 57 between the Cable Trap (66) and the Pulley. 66 Tighten 3/8" x 2" Bolt (12) and the 3/8" Nylon 12 Locknut (not shown). Be sure that the Cable is in the groove of the Pulley and that the Cable and Pulley move smoothly. 15 Attach the end of the Long Cable (86) to the Front Base (4) with a 5/16" x 2 3/4" Bolt (11), a 5/16" Flat Washer (8), and a 5/16" Nylon Locknut (3). 86 4 11 8 3 36. Attach the Small "U"-Bracket (67) to the 36 Weight Tube (63) with the 5/16" x 1 3/4" Bolt (72) and a 5/16" Nylon Locknut (3). 3 67 72 63 37. Attach the Small Backrest (80) to the Rear 37 Upright (56) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Flat Washers (10). ...'11 I I 0 :E 80 ''N 10 43 56 15