Whirlpool WED6400S Use and Care Manual - Page 19

Damp The Damp light illuminates in an Automatic Cycle when the laundry is approximately 80% dry. Damp Dry Signal beeps, if selected. See "Options." Cool Down The Cool Down light illuminates during the cool down part of the cycle. Laundry cools for ease in handling. Done The Done light illuminates when the drying cycle is finished. This indicator stays on during the WRINKLE SHIELD TM setting. WRINKLE SHIELD TM Setting The WRINKLE SHIELD TM setting light illuminates when this option is selected. This indicator stays on during the WRINKLE SHIELD TM setting. Indicator lights Other indicator lights show Cycle, Modifiers, Options and Cycle Signal settings selected. The display shows the estimated or actual time remaining. Select the drying cycle that matches the type of load you are drying. See Automatic or Timed Preset Cycle Settings charts. CASUAL DELICATE TIMED DRY QUICK TOUCH DRY UP Automatic Cycles Automatic Cycles allow you to match the cycle to the load you are drying. See the following Automatic Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying. Heavy Duty Use this cycle to get high heat for heavyweight mixed loads, cottons and jeans. Normal Use this cycle to get medium heat for drying sturdy fabrics such as work clothes. Casual Use this cycle to get low heat for drying no-iron fabrics, such as sport shirts, casual business clothes and permanent press blends. Delicate Use this cycle to get extra-low heat to gently dry items such as lingerie, blouses or washable knit fabrics. Automatic Preset Cycle Settings Automatic Cycles Load Type HEAVY DUTY Heavyweight mixed loads, cottons, jeans NORMAL Corduroys, work clothes CASUAL Business casual clothes, permanent press, synthetics DELICATE Lingerie, blouses, washable knit fabrics Temperature High Medium Low Extra-Low Timed Cycles Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing the Time Adjust up or down arrows. See "Changing Cycles, Modifiers and Options." NOTE: Timed Cycles may also be used with the dryer rack. See "Dryer Rack." Timed Dry Use this cycle to complete drying if items are still damp after an Automatic Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting. QUICK DRY Use this cycle for drying small loads or loads that need a short drying time. Touch Up Use this cycle to help smooth out wrinkles from such items as clothes packed in a suitcase or items wrinkled from being left in the dryer too long. Timed Preset Cycle Settings Timed Cycles Load Type Default Temperature Default Time (Minutes) TIMED DRY High 40 Heavyweight, bulky items, work clothes QUICK DRY Small loads Medium 24 TOUCH UP Medium 20 Helps to smooth out wrinkles 19