Whirlpool WRFF5333P Owners Manual - Page 17
Style 2- Right-Hand Side of Refrigerator Ceiling, IMPORTANT
View all Whirlpool WRFF5333P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
5. Install the water filter cap onto the new filter. Be sure to align the arrows so the grooves in the filter align with ribs in the filter cap. Style 2- Right-Hand Side of Refrigerator Ceiling 1. Locate the accessory packet in the refrigerator and remove the water filter. 2. Take the water filter out of its packaging and remove the cover from the O-rings. Be sure the O-rings are still in place after the cover is removed. 6. Insert the filter into the housing. A. O-ring cover B. O-rings 3. The water filter compartment is located in the right-hand side of the refrigerator ceiling. Push up on the compartment door to release the catch, then lower the door. 7. Twist the water filter and turn 90° clockwise until it locks into place and the arrows are aligned. 8. Push the water filter door closed. 4. Align the arrow on the water filter label with the cutout notch in the filter housing and insert the filter into the housing. 5. Turn the filter clockwise 90 degrees (1/4 turn), until it locks into the housing. NOTE: If the filter is not correctly locked into the housing, the water dispenser will not operate. Water will not flow from the dispenser. 6. While the compartment door is still open, lift the filter up into the compartment. Then, close the filter compartment door completely. 7. Flush the water system. See "Water and Ice Dispensers" for details. IMPORTANT: If you do not flush the water system, you may experience dripping and/or decreased flow from the water dispenser. Style 3- Top-right Corner of Refrigerator Ceiling 17