Whirlpool WRFF5333P Owners Manual - Page 28

PERFORMANCE DATA SHEET, Replacement Filter EDR4RXD1B, EDR4RXD1, and KAD4RXD1

Page 28 highlights

PERFORMANCE DATA SHEET Water Filtration System Model W11256135 and W11311161 Replacement Filter EDR4RXD1B, EDR4RXD1, WHR4RXD1, and KAD4RXD1 Capacity 200 Gallons (757 Liters) with PID, 100 Gallons (379 Liters) without PID. System tested and certified by NSF International against NSF/ANSI Standard 42, 53, 401 and CSA B483.1 for the reduction of contaminants specified on the Performance Data Sheet. This system has been tested according to NSF/ANSI Standards 42, 53, 401 and CSA B483.1 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53, 401 and CSA B483.1. Substance Reduction Aesthetic Effects Chlorine Taste/Odor Influent Challenge Concentration 2.0 mg/L ± 10% Maximum Permissible Product Water Concentration 50% reduction Average % Reduction >97.4% Minimum % Reduction 97.4% Particulate Class I* At least 10,000 particles/ 85% reduction mL 99.3% 99.0% Contaminant Reduction Influent Challenge Concentration Lead: @ pH 6.5 / @ pH 8.5 Mercury: @ pH 6.5 / @ pH 8.5 Asbestos Cysts† Atrazine Benzene Carbofuran Lindane P-Dichlorobenzene Tetrachloroethylene Toxaphene Atenolol Endrin Ethylbenzene o-Dichlorobenzene Carbamazepine DEET Linuron Meprobamate Metolachor Trimethoprim 0.150 mg/L ± 10% 0.006 mg/L ± 10% 107 to 108 fibers/L†† 50,000/L min. 0.009 mg/L ± 10% 0.015 mg/L ± 10% 0.080 mg/L ± 10% 0.002 mg/L ± 10% 0.225 mg/L ± 10% 0.015 mg/L ± 10% 0.015 mg/L ± 10% 200 ± 20% 0.006 mg/L ± 10% 2.1 mg/L ± 10% 1.8 mg/L ± 10% 1400 ± 20% 1400 ± 20% 140 ± 20% 400 ± 20% 1400 ± 20% 140 ± 20% Maximum Permissible Product Water Concentration 0.010 mg/L Average % Reduction 99.6% / >99.7% Minimum % Reduction 99.3% / >99.7% 0.002 mg/L 96.3% / 94.5% 96.3% / 89.5% >99% >99.95% 0.003 mg/L 0.005 mg/L 0.040 mg/L 0.0002 mg/L 0.075 mg/L 0.005 mg/L 0.003 mg/L 30 ng/L 0.002 mg/L 0.7 mg/L 0.6 mg/L 200 ng/L 200 ng/L 20 ng/L 60 ng/L 200 ng/L 20 ng/L >99% >99.99% >94.3% >96.5% >98.8% >99.0% >99.8% >96.4% >93.2% >95.5% 96.4% >99.9% >99.9% >98.7% >98.6% >96.3% >95.2% >98.7% >96.6% >99% 99.99% 94.3% 96.5% 98.8% 98.9% 99.8% 95.8% 93.1% 95.5% 94.8% 99.9% 99.9% 98.6% 98.6% 96.3% 95.2% 98.7% 96.5% 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

28
PERFORMANCE
DATA
SHEET
Water Filtration System
Model W11256135 and W11311161
Replacement Filter EDR4RXD1B, EDR4RXD1, WHR4RXD1, and KAD4RXD1
Capacity 200 Gallons (757 Liters) with PID,
100 Gallons (379 Liters) without PID.
System tested and certified by NSF International against NSF/ANSI Standard
42, 53, 401 and CSA B483.1 for the reduction of contaminants specified on the
Performance Data Sheet.
This system has been tested according to NSF/ANSI Standards 42, 53, 401 and CSA B483.1 for the reduction of the substances listed
below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to
the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53, 401 and CSA B483.1.
Substance Reduction
Aesthetic Effects
Influent Challenge
Concentration
Maximum Permissible
Product Water
Concentration
Average % Reduction
Minimum % Reduction
Chlorine Taste/Odor
2.0 mg/L ± 10%
50% reduction
>97.4%
97.4%
Particulate Class I*
At least 10,000 particles/
mL
85% reduction
99.3%
99.0%
Contaminant
Reduction
Influent Challenge
Concentration
Maximum Permissible
Product Water
Concentration
Average % Reduction
Minimum % Reduction
Lead: @ pH 6.5 / @ pH
8.5
0.150 mg/L ± 10%
0.010 mg/L
99.6% / >99.7%
99.3% / >99.7%
Mercury: @ pH 6.5 / @
pH 8.5
0.006 mg/L ± 10%
0.002 mg/L
96.3% / 94.5%
96.3% / 89.5%
Asbestos
10
7
to 10
8
fibers/L††
>99%
>99%
>99%
Cysts†
50,000/L min.
>99.95%
>99.99%
99.99%
Atrazine
0.009 mg/L ± 10%
0.003 mg/L
>94.3%
94.3%
Benzene
0.015 mg/L ± 10%
0.005 mg/L
>96.5%
96.5%
Carbofuran
0.080 mg/L ± 10%
0.040 mg/L
>98.8%
98.8%
Lindane
0.002 mg/L ± 10%
0.0002 mg/L
>99.0%
98.9%
P-Dichlorobenzene
0.225 mg/L ± 10%
0.075 mg/L
>99.8%
99.8%
Tetrachloroethylene
0.015 mg/L ± 10%
0.005 mg/L
>96.4%
95.8%
Toxaphene
0.015 mg/L ± 10%
0.003 mg/L
>93.2%
93.1%
Atenolol
200 ± 20%
30 ng/L
>95.5%
95.5%
Endrin
0.006 mg/L ± 10%
0.002 mg/L
96.4%
94.8%
Ethylbenzene
2.1 mg/L ± 10%
0.7 mg/L
>99.9%
99.9%
o-Dichlorobenzene
1.8 mg/L ± 10%
0.6 mg/L
>99.9%
99.9%
Carbamazepine
1400 ± 20%
200 ng/L
>98.7%
98.6%
DEET
1400 ± 20%
200 ng/L
>98.6%
98.6%
Linuron
140 ± 20%
20 ng/L
>96.3%
96.3%
Meprobamate
400 ± 20%
60 ng/L
>95.2%
95.2%
Metolachor
1400 ± 20%
200 ng/L
>98.7%
98.7%
Trimethoprim
140 ± 20%
20 ng/L
>96.6%
96.5%