Whirlpool WRT138FFD Installation Instructions - Page 20

Connecting the power/leveling the unit

Get Whirlpool WRT138FFD PDF manuals and user guides View all Whirlpool WRT138FFD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Connecting the power/leveling the unit WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Plug the power cord into its AC outlet, and carefully push the refrigerator back against the wall. 2. Place a level on top of the cabinet. If you need to re-level the refrigerator, follow the procedure to adjust the front casters, as outlined in your refrigerator's "Use and Care Guide." 3. Check the position of the ice maker. If it is crooked and needs to be adjusted, loosen the bottom bracket screws (see the side diagram) and position the unit as desired, then tighten the bracket screws. Leveling screw Bracket Sheet-metal screw (for Side-By-Side and 14 to 18 Cubic Foot Top Freezer Models) Sheet-metal screw (for 11 Cubic Foot Top Freezer Models only) Leveling the ice maker 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
20
Connecting the power/leveling the unit
1.
Plug the power cord into its AC outlet, and carefully push the
refrigerator back against the wall.
2.
Place a level on top of the cabinet. If you need to re-level the
refrigerator, follow the procedure to adjust the front casters,
as outlined in your refrigerator’s “Use and Care Guide.”
3.
Check the position of the ice maker. If it is crooked and
needs to be adjusted, loosen the bottom bracket screws
(see the side diagram) and position the unit as desired, then
tighten the bracket screws.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Bracket
Sheet-metal screw
Leveling screw
(for Side-By-Side and
14 to 18 Cubic Foot Top Freezer Models)
Sheet-metal screw
(for 11 Cubic Foot Top Freezer Models only)
Leveling the ice maker