Xerox 1235/DX Troubleshooting Guide - Page 112
Un Un Wn Un, messages or until the toner cartridge is replaced.
UPC - 042215474542
View all Xerox 1235/DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Troubleshooting Printer Management Status Messages (cont'd.) Message Type Un-LED Bar Missing [U18-Yellow LED Bar Missing] [U19-Magenta LED Bar Missing] [U20-Cyan LED Bar Missing] [U21-Black LED Bar Missing] Fault Un-Drum Error Fault [U26-Yellow Drum Error] [U27-Magenta Drum Error] [U28-Cyan Drum Error] [U29-Black Drum Error] Wn-Toner Low [W1-Yellow Toner Low] [W2-Magenta Toner Low] [W3-Cyan Toner Low] [W4-Black Toner Low] Attention Un-Toner Missing Fault [U22-Yellow Toner Missing] [U23-Magenta Toner Missing] [U24-Cyan Toner Missing] [U25-Black Toner Missing] W5-Transfer Belt Near End Attention Of Life Explanation/Corrective Action The LED bar is either missing or requires reseating to be recognized by the printer. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, check the support links at www.xerox.com/officeprinting/1235support. The imaging drum is either missing or requires reseating to be recognized by the printer. Turn off the printer, make sure the imaging drum is properly installed and turn on the printer. If the problem persists, install a new imaging drum. For further assistance, visit the support links at www.xerox.com/officeprinting/1235support. The level of toner in the toner cartridge is low. The toner cartridge should be replaced soon, as it is near its end of life. Printing can continue until the toner cartridge is empty; however, some degradation of image quality may occur. The message remains until interrupted by other messages or until the toner cartridge is replaced. The toner is either missing or requires reseating to be recognized by the printer. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, check the support links at www.xerox.com/officeprinting/1235support. The transfer belt is near its end of life. Printing can continue until the printer determines that the transfer belt is at its end of life; however, some degradation of image quality may occur. The message remains until interrupted by other messages or until the transfer belt is replaced. 96 Phaser 1235 Network Color Printers