Xerox 1235/DX Troubleshooting Guide - Page 82

Managing Printer Usage Front Panel Menus, Items and Values (cont'd.) Menu Service 66 Description and Items Note This menu is generally intended for service personnel use. Allows you to modify operating system parameters, run diagnostics and obtain configuration information. The Service menu items are: Configuration Prints the configuration sheet showing the printer's current Sheet information and menu settings. Print Service Pack Prints the system test patterns and configuration pages used by the Xerox service organization. The following set is printed: Diagnostic Summary Configuration Page Network Summary System Event Log Print Diag Summary Prints the current diagnostic summary data. Print PQ Set Prints the PQ set (one of each): Print Network Summary "Test Pattern A" "Color Balance" "Diagnostic Page" Prints network traffic and diagnostic information. Print Test Patterns Print Quantity Prints the system test patterns: 100% Stripe Blank Cyan Step Magenta Step Yellow Step Black Halftone PS Pattern A Gray Step Color Balance Sets the number of times each diagnostic report page is printed (uncollated). This value is reset to 1 upon exiting the service menu. Select Tray Selects the source tray from which the diagnostic report is to be printed. This value appears only if optional Trays 2 and 3 are installed. Show Page Counts Show CRU Usage Displays summary page count data on the front panel: Total Count Black Count Cyan Count Magenta Count Yellow Count Displays percentage remaining on the front panel for the following Customer Replaceable Consumables (CRC): Black Imaging Drum Cyan Imaging Drum Magenta Imaging Drum Yellow Imaging Drum Fuser Transfer Belt Indicates CRC usage by displaying values OK, Low, or Empty for the following CRCs on the front panel: Black Toner Cyan Toner Magenta Toner Yellow Toner Phaser 1235 Network Color Printers