Xerox 2006NPC DocuColor 2006 Problem Solving - Page 29
Adjusting the printer color, VisualCal, 1. Print Limits
UPC - 042215475440
View all Xerox 2006NPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Adjusting the color 24. Problem Solving Adjusting the printer color Perform this procedure if you have color problems such as insufficient amounts of one or more colors, or excessive amounts of one or more colors. If a message to replace a Dry Ink Color Cartridge is displayed on the Printer Control Panel, replace the cartridge BEFORE performing this adjustment. VisualCal There are three parts to the VisualCal adjustment. Do not skip any steps or perform any part out of sequence. If you wish to stop the VisualCal adjustment, you may press the Cancel button at any time. Pressing the Cancel button returns the menu to READY. 1. Print Limits Page 1. Ensure that READY is displayed on the Printer Control Panel. Any error, low toner, or paper messages will result in a printing warning to abort calibration. 2. Press the Menu button repeatedly until VISUALCAL is displayed. 3. Press the Item/Enter button. PRINT LIMITS YES is displayed on the Control Panel screen. 4. Press the Item/Enter button. PRINTING LIMITS PAGE is displayed and after a few moments, the page is delivered to the Printer Output Tray. 5. Under your normal lighting, study the Black Start row. a. Select the left-most circle that you can distinguish from the background and draw a circle around it. View the page at an angle for the best results. b. Select the left-most circle that you can distinguish from the background on the next row, Black End, and draw a circle around it. c. If you cannot see any circle in the row, write 9 next to the row. d. If you see all the circles in a row, write 0 next to the row. Xerox DocuColor 2006 24-29